Heavy-duty push back racking system shelves can also be called beam shelves, or called shelf shelves, which belong to the pallet shelf category, and it is also a shelf type that is more common in the domestic storage shelf system. The composition of heavy-duty shelves is assembled by columns, beams, horizontal bracings, diagonal bracings and self-locking bolts, which can prevent shelf instability after bolt loosening; Heavy-duty shelves have the overall simplicity and beauty, high safety factor, fast access speed, space-saving, widely used in storage, only in the industrial racking systems process of use pay attention to correct standardization, in order to give full play to the efficiency of the shelves, to achieve large.
Precautions for heavy duty racking:
1. Use to prevent top-heavy: the principle heavy duty metal racking of light goods at the top and heavy goods at the bottom should be achieved.
2. Anti-overload: The weight of each layer of goods storage shall not exceed the large load of the shelf design.
3. Anti-ultra-high and ultra-wide: The shelf height and layer width have been limited, and the size of the card board and goods should be slightly less than the net space of 100mm.
4. Anti-collision: Forklifts should be handled as lightly as possible during operation.
5. When there is a place of goods above the shelf, the operator should try not to enter the bottom of the shelf directly.
6. Prevent the use of non-standard floor plates (card boards) on the shelves, and the sichuan teardrop pallet racking character bottom is suitable.